MCC stocking Bernstein Electronic Magnetic Sensors

Bernstein is one of the world‘s leading providers of industrial safety technology delivering solutions in lift, construction, automotive, plant/machinery construction and automation engineering industries.

The BERNSTEIN range of teachable electronic magnetic sensors combines two programmable switching points and fully integrated electronics in an enclosure that boasts the smallest dimensions in its class. This highly compact design allows the intelligent sensor to be fully recessed in standard T and C-slots (e. g. FESTO or SMC), providing maximum protection for the integrated electronics within an IP67 rated enclosure.

When the easy to use teaching tool is placed over the installed sensor, it automatically selects programming mode and the two switching points can then be set at the push of a button. The two LEDs on the sensor then serve as function indicators, providing information onthe programming status and displaying signal faults. This helps prevent unintentional changes to the settings whilst retaining the safety class rating.

Advantages

• Fully integrated electronic solution
• Permanent protection rating
• No need to mount additional electronics
• Fully immersed and therefore protected installation in the slot
• Suitable for standard C and T-slots
• Available as cable or plug version
• Only takes up one slot
• Two freely programmable switching points
• Straightforward teach-in procedure
• Reduced installation and wiring requirements
• Top-mounted
• High switching accuracy

For more information Contact our Customer Support Team via email: enquiries@mccautomation.com or Phone: 028 9077 2773

High Performance Mixed I/O Modules for analog and digital signals now available from MCC Automation

Seneca have launched their new High Performance Mixed I/O Modules for analog and digital signals which is now available exclusively from MCC Automation.

Features include:

• Mixed I / O Modules for analog and digital signals
• High Performance Modules with 100 MHz ARM processor
• MODBUS TCP-IP Protocol
• MODBUS RTU Protocol on bus / clamps
• Built-in web server for remote visualisation and configuration of the I / O values
• Extended range for input voltage up to 30 V
• 16-bit ADC, acquisition speed configurable from 5 to 300 ms
• Software EASY SETUP through USB port
• Up to 4 client TCP-IP setting up
• Fully configurable compatible with iPhone, iPad, and Android systems

For more information please contact the MCC Automation Customer Service Team on 028 9077 2773 or email: enquiries@mccautomation.com

Download Datasheet

MCC Automation now stocking the new Bernstein CC-3000 Modular Housing & Suspension System

MCC Automation are now stocking the new Bernstein CC-3000 Modular Housing & Suspension System; a flexible, easy to assemble, ergonomic and innovate system for panel and machine builders.

The CC-3000 System provides variability in system configuration, advanced design and absolute ease of assemble are the main requirements of system builders when specifying control enclosure suspension systems.  Bernstein have set new standards with the new CS-3000:  A modern industrial design, excellent ergonomics and multiple component combinations create an innovate system solution on a modular principle.

Modular System

Key features:

• 5 basic design variants available
• Modern industrial design with family characteristics and features
• Front panels can be mounted both internally and externally
• Protection IP 65

• Internal mounting slots for simple fastening using springs nuts
• Rear panel can be fixed or hinged as lockable door
• Good heat dissipation due to single-wall profiles
• No outer profile rubber seal required

The Bernstein CC-3000 Hiousing System is especially suitable for mounting display components or control elemnts, (HMI's, IPC's etc.) Its height and width are variable up to a maximum recommended size of approx 600mm x 600mm.  Various combinations of 55mm, 120mm and 200mm wide aluminium profiles give the housing several depth possibilities. 

Suspension System

Key features:

• Long Safety Life & Safe Operation
• Smooth transitions between tube and system components
• Modular Upgrading available
• Protection IP 65
• Specially designed for simple and virtual fatigue free operation

• User friendly adjustment and easy cleaning design
• Rear Additional connection via mounting area component design
• Good Cable and assembly access on all deflection points
• Various lengths available

The numerous modules and components of the CS-3000 offer the ultimate in system flexibility.  Even the most angular systems for plant and machines can be created.  This versatility is unique to the market.

For more information, email:  enquiries@mccautomation.com or Phone: 028 9077 2773 

Rockwell Automation introduces the Allen-Bradley 873M Ultrasonic Sensors Family

Rockwell Automation have introduced the new Allen-Bradley 873M family of general purpose ultrasonic sensors.  These sensors are now available from our customer service team at MCC Automation.

Rockwell Automation introduces the Allen-Bradley 873M family of general purpose ultrasonic sensors. These feature sensing distances between 30 an 80mm, the 873M family compliments the existing Rockwell ultrasonic sensor offerings by providing a more cost-effective solution for shorter range applications. 

The sensors are excellent for standard packaging and assembly applications, but they are also ideal for sensing many of the targets that can prove to be challenging for photoelectric sensors, such as clear, shiny, or non-reflective objects.

Key features: 

 

•  Nickel-plated brass 18 mm cylindrical or right-angle threaded barrel provides ease of mounting and reduces installation time
• Analog model's feature 0...10 VDC or 4...20mA
• Discrete (PNP) models feature normally-open/normally close functions
• Window teaching allows sensing range to be defined inside a user-taught sensing area for both discrete and analog models. The user can achieve superior background suppression
• Teaching of the sensor can be accomplished by remote teach or optional programming cable
• Bright LEDs allow the user to monitor power, output and margin from any direction - reducing time required for setup and troubleshooting
• Features an IP67 rating for harsh-duty environments

For more information, email: enquiries@mccautomation.com or Phone: 028 9077 2773